Repair quality control information

If completing a blade damage report the following repair quality control information must be entered for each repair. All quality control requirements must satisfy the guidelines specified in each specific repair procedure:

• Highest or lowest ambient temperature observed during repair.
• Highest ambient humidity recorded during repair.
• Resin type (if used).
• Resin batch number (if used).
• Resin expiry date (if used).
• Hardener type (if used).
• Hardener type batch number (if used).
• Hardener type expiry date (if used).
• Glass supplier (If used).
• Blade surface temperature during lamination.
• Quantity of resin used.
• Lowest post-cure surface temperature observed during repair.
• Total curing time.
• Lightning system measurement required whenever lightning is suspected as a cause of damage pre and post repair.